Colour and Food: Appearance, Appetite and Regulation

Eating starts with looking

Long before anything reaches the tongue, a judgement has been made. Colour tells us whether fruit is ripe, whether meat has turned, whether bread is underbaked, whether a wine is old. These are not arbitrary associations: they track real chemistry, because the pigments in food change as the food changes. Chlorophyll degrades, anthocyanins shift with acidity, myoglobin oxidises, sugars and amino acids brown under heat. Colour is a genuine signal, which is precisely why it can be exploited.

The food industry has understood this for well over a century, and the result is one of the most heavily regulated corners of colour work. Almost nothing about the appearance of a packaged food is accidental. This piece looks at the underlying chemistry, the psychology that has been demonstrated rather than merely asserted, how colour is measured in a factory, and how regulation differs enough across jurisdictions that the same product has to be reformulated to cross a border.

Where the colour of food comes from

Natural food colour comes from a relatively small set of pigment families, and each behaves differently under heat, light, acid and oxygen. Knowing which family you are dealing with predicts most processing problems.

  • Chlorophylls. The greens of vegetables. They are unstable in acid: the magnesium at the centre of the molecule is displaced by hydrogen, converting bright green chlorophyll into dull olive pheophytin. This is why boiled greens go drab and why blanching then chilling quickly preserves colour better than long cooking.
  • Carotenoids. Yellows, oranges and reds in carrots, tomatoes, peppers and salmon. They are fat-soluble and comparatively heat-stable, but sensitive to oxidation and light, which is why paprika fades in a clear jar on a sunny shelf.
  • Anthocyanins. The reds, purples and blues of berries, red cabbage and black rice. They are strongly pH-dependent: red in acid, violet near neutral, blue-green in alkali. This makes them beautiful and infuriating, since a small formulation change shifts the colour dramatically.
  • Betalains. The intense red-violet of beetroot. Heat-sensitive and useful mainly in products that are not cooked hard.
  • Myoglobin. The pigment governing meat colour. Purplish when deoxygenated, bright red when freshly exposed to oxygen, brown when oxidised further. Consumers read brown as spoiled even when the meat is perfectly safe, which drives packaging decisions.
  • Maillard and caramel products. The browns of crust, roast and caramel are generated during cooking rather than present beforehand, and they carry most of the flavour associations of cooked food.

What colour does to perceived taste

The evidence that colour influences flavour perception is unusually good for a psychological claim, because the experiments are easy to run and have been repeated across decades and cultures. The consistent finding is that colour biases identification and intensity judgements, and that it does so even in people who know what is happening.

Participants given a clear drink flavoured with cherry frequently identify it wrongly, and dyeing a lime drink red pushes identification towards cherry or strawberry. In tinted-glass experiments where wine colour is masked, tasters describe white wine dyed red using the vocabulary reserved for reds. In sweetness studies, adding red colour to a solution raises perceived sweetness at constant sugar content, typically by a modest but consistent margin.

Effects that replicate reasonably well

  • Identification bias. Colour anchors expectation, and flavour perception is pulled towards the expectation. The effect weakens with strong, familiar flavours and with expert tasters, but rarely disappears.
  • Intensity scaling. A more saturated colour is generally read as a more intense flavour. Deeper orange juice is judged as more orange-tasting than a paler sample of the same juice.
  • Sweetness lift. Red and pink hues push sweetness ratings up slightly, which is commercially interesting for sugar-reduction work.
  • Container and crockery effects. The colour of the plate or cup shifts ratings too, though these effects are smaller and less reliable than the headlines suggest.
  • Appetite claims are weaker. The frequently repeated assertion that blue suppresses appetite is not well supported. It is a plausible story built on the rarity of blue in natural food, and it circulates far beyond the evidence.

Measuring colour on a production line

Food colour is a quality control parameter with real money attached, so it gets measured instrumentally rather than judged by eye. The usual approach is a spectrophotometer or tristimulus colorimeter reporting values in CIELAB, where L* is lightness, a* runs green to red, and b* runs blue to yellow.

Food is a difficult measurement target. It is rarely flat, rarely uniform, often glossy, often translucent, and it changes while you measure it. A slice of tomato has a shiny cut face and a matte skin; ground coffee is a heap of particles whose apparent colour depends on how it was packed into the sample cup. Repeatable food colour measurement is mostly a discipline of sample preparation.

Practical measurement issues

  • Aperture size. Small apertures give noisy readings on heterogeneous samples. Use the largest aperture the instrument allows and average multiple positions.
  • Translucency. Semi-transparent foods let light travel sideways within the sample, so readings depend on sample depth and on what is behind it. Standardise both, and state them in the method.
  • Gloss and specular reflection. A wet surface bounces light directly into the detector. Instruments with a sphere geometry and the specular component excluded usually track visual judgement better on shiny foods.
  • Time dependence. Cut fruit browns, meat blooms then oxidises, and sauces separate. The method must fix how long after preparation the reading is taken.
  • Derived indices. Many sectors use category-specific scales, such as browning indices for baked goods or established colour cards for honey and beer. These are convenient but not interchangeable between products.

Regulation, and why it is not the same everywhere

Added colours are among the most tightly controlled food additives, and the rules diverge sharply by jurisdiction. In the European Union, permitted colours carry E numbers and are covered by a regulation that lists which additives may be used in which food categories and at what maximum levels. In the United States, the Food and Drug Administration maintains a list of certified colour additives, and each manufactured batch of a certified synthetic dye must be submitted for testing and certification before sale.

The divergence is not merely bureaucratic. A widely cited British study in 2007 associated certain synthetic dyes combined with a preservative with increased hyperactivity in children. The European response was a mandatory warning label on foods containing six specified colours, stating that they may have an adverse effect on activity and attention in children. Manufacturers overwhelmingly reformulated rather than carry the warning, which is why many confectionery products sold in Europe use plant-derived colours while nominally identical products elsewhere use synthetics.

Points that regularly cause confusion

  • Colouring foodstuffs versus additives. Concentrates made from fruit or vegetables by physical processes can sometimes be declared as ingredients rather than additives, which is commercially attractive but subject to strict criteria about whether the source was selected for colour alone.
  • Natural does not mean stable or safe by default. Plant-derived colours are typically less stable, more expensive and more variable batch to batch, and some carry their own allergen or intake considerations.
  • Enhancing versus deceiving. Most frameworks prohibit using colour to disguise inferior quality or to imply an ingredient that is absent. The line between restoring colour lost in processing and implying more fruit than is present is where enforcement actually happens.
  • Titanium dioxide. The white opacifier E171 was removed from the European permitted list in 2022 following a safety reassessment, while remaining permitted in several other markets. A single ingredient decision can force a global reformulation.

Keeping the colour once you have it

Formulating a colour is the easy part. Holding it through processing, distribution and a stated shelf life is where most product development time goes, and it is a chemistry problem rather than a design one. A colour that is correct on the day of manufacture and visibly wrong three months later has failed just as completely as one that was never right.

The main degradation routes

  • Light. Photodegradation affects most natural colours and some synthetics. Clear packaging on a lit shelf is the harshest environment a product will meet, and it is the one that gets tested least.
  • Oxygen. Oxidation dulls carotenoids and browns cut surfaces. Barrier films, vacuum packing and antioxidants are the usual defences, and each changes the product cost.
  • pH drift. Anthocyanin-coloured products can shift hue if the formulation acidity changes during storage or if an ingredient buffers unexpectedly.
  • Metal ions. Trace iron or copper from water or equipment can complex with certain pigments and produce grey or greenish casts that appear only in some production batches.
  • Heat load. Sterilisation and retorting are brutal on betalains and anthocyanins. Products that must be shelf-stable at ambient temperature often cannot use the colour source that would look best.

Packaging, lighting and the point of sale

The colour a shopper sees is the product of the food, the packaging window, the lighting and the surrounding pack graphics. Retail lighting over fresh counters is routinely chosen to flatter: warmer, red-enhanced spectra over meat, cooler and greener over produce. This is legal in most jurisdictions and is exactly the kind of practice that sits uncomfortably close to the deception line, since a shopper cannot easily correct for it.

Packaging film adds a further layer. A slight tint in a transparent wrapper shifts the apparent colour of what is inside, and modified atmosphere packaging keeps meat red for longer by controlling the oxygen environment rather than by changing the meat. The result is that the honest signal that colour once carried — freshness — has been substantially decoupled from the underlying state of the product.

For anyone working with food colour, the useful stance is technical and slightly sceptical: know which pigment family you are handling and what will destabilise it, measure with a documented method rather than by eye, check the additive rules for every market you sell into rather than assuming a formulation travels, and be clear-eyed about where appearance management stops being craft and starts being a claim the product cannot support.